The usage of Hydraulic Hose Crimper
Open the tube fixed on the our machine, heater (ring) when the
temperature reached, push it until tube head shape have been made.
The range of application
Hydraulic hose crimping machine is widely used in connecting of
pipe fittings, automotive tubing,air hose,
water hose and so on.It is the ideal tube forming equipmen.
Equipped with imported original components which make the machine
has steady performance.
Large opening with dies,suitable for crimping special elbow
Precise numerical regulator,in precision of 0.01mm.
Equipped with protection adapter which protect dies against the
Dies can be changed integrally,quickly and facility.
Main parameters of Hydraulic Hose Crimper
|Crimp range||4-51 mm|
|crimping force||600 T|
|Number of dies||14 sets|
|open time||1.2 s|
|close time||4 s|
|maxium opening||120 mm|
|rated press||31.5 mpa|
Notices of Hydraulic Hose Crimper
1. When buckling, make the joint to locate the mould center as much
as possible, the joint is not buckled on the hex nut.
2. Prevent tool and other foreign matter from entering the locking
3. After the work is finished for each time, the eight-block mould
base must be made to extend to the greatest extent, this can make
the spring to be at extension status. If not, the spring will be
4. When working, the hand should not stretch into the locking head.
5. The power supply must be switched off when maintenance is done.
Warranty of Hydraulic Hose Crimper
The machine failures are warranted to repair in 6 months for the
electric from the purchased date, and 1 year for the body of the
All the accessories failures will be repaired (if necessary,
replace) free charge during the warranty. In case of damage from
improper use or accident damage, the repairs are not free.